Product Coefficient
1. Designed and developed especially for marine use.
2. Mainly applied in mechanical/manual steering for yachts, fishing boats and other waterborne vehicles.
3. Made in zinc alloy, corrosion resistant, ergonomically designed, easy to install, compact for mounting.
4. Combined with steering cable series 160, 316 stainless steel end fittings, can be any length within 8m.
5. For use with marine outboard engines under 125hp.
6. Approved ISO 9001:2000 certificate.
Product Details:
1.The steering Helm is a gearbox arrangement mounted on the dashboard of the boat .On the shaft the helm is mounted the steering wheel.
2.The steering cable is a push pull mechanical cable which converts the rotary motion of the helm to linear motion at the engine/rudder .One of the end cable is connected to the helm and the other end to the rudder.
3.Bezel Kit is a plastic part along with related hardware which is mounted between the steering wheel and dash board to cover the helm hardware.
Procuct Picture
More choice for cable length:
Single Turbine Rotating Gear Series
10FT
12FT
14FT
15FT
17FT
19FT
21FT
29FT
The Kit Includes:
· Steering Cable
· Steering Helm - Planetary gear, 3/4"" tapered shaft
· Bezel Kit
· Steering Wheel
· 90 degree bearing
1. Designed and developed especially for marine use.
2. Mainly applied in mechanical/manual steering for yachts, fishing boats and other waterborne vehicles.
3. Made in zinc alloy, corrosion resistant, ergonomically designed, easy to install, compact for mounting.
4. Combined with steering cable, 316 stainless steel end fittings, can be any length within 30 Feet.
STEERING HELM :
The Steering Helm is a gearbox arrangement mounted on the dashboard of the boat.On the shaft of the helm is mounted the Steering Wheel.
Applications:
Suit for max. 30 Feet(9 meters) out board boat(up to 200hp)
Max load 300 pounds at tiller.
Planetary Gear design:3 turns lock to lock
Max steering wheel dia 406mm (16")
Minimal feedback
Shaft Length: 125mm
Material:Chromed plated Zinc Alloy
BEZEL KITS
Bezel kit is a plastic part along with related hardware which is mounted between the steering wheel and dash board to cover the helm hardware.
Features:
Bezel made from Engineering Plastic
Black color available as standard options
90 degree tilt
Contains mounting hardware
STEERING CABLE
The Steering Cable is a push pull mechanical cable which convents the rotary motion of the helm to linear motion at the engine/rudder.One end of the cable is connected to the helm & the end to the rudder.The latest construction technology, the internal control line used elastic material.Output used 304 stainless steel seamless pipe and corrosion-resistant materials, control lines has longer life.
5-30 feet length control line can be used, and to increase per 1-foot increments.
Features:
Output ends made of 316 Stainless Steel
Maximum Trave:9inch(225mm)
Minimum bend radius:8 inch (200mm)
Maximum working load at Tiller end:5000N
Cable Outer Diameter:16.5mm
Spiral inner cable Diameter:8mm
When replacing your existing cable, you can usually find a part number and/or length stamped on the outer jacket.
If it is not legible, it will be necessary to make careful examination of your system to determine what type of cable you need and then to
actually measure the length required for proper cable replacement of selection and installation.
Follow the above quick method for measuring all steering cables to determine the correct length you will need.
Simply measure the lenath of the "B" requirement as indicated below. Then add 30 inches. Divided the total by 12.
Your answer will probably be xx.x. Whatever the number before the decimal is the whole foot conversion.
Take the number and round up to the next whole foot measurement. This work for either rack (shown above) or rotary steering cable.
FOR MORE INFORMATION, PLEASE FEEL FREE TO CONTACT US!
Audited Supplier 
){kind=link}
){kind=link}