Wholesale 14feet 316ss Marine Steering Cable for Boat and Yacht

• After-sales Service: Yes
• Warranty: 1 Year
• Type: Steering Gears/Shaft
• Model NO.: 160C
• Material: 316ss
• Certification: ISO
• Standard: Standard
• Condition: New
• Transport Package: Carton Box/Plywood Box
• Specification: 316 SS
• Trademark: NAUTFLEX
• Origin: Zhejiang
• HS Code: 8409991000
• Production Capacity: 50000/M/Month

Product Description

STEERING CABLE
The Steering Cable is a push pull mechanical cable which converts the rotary
motion of the helm to linear motion at the engine/rudder . One end of the cable is connected to the helm & the other end to the rudder.
Features:
Output ends of 316 Stainless Steel
Maximum Travel: 9inch (230 mm)
Minimum bend radius : 8 inch (200mm)
Maximum working load at Tiller end: 5000N (500kg)
Cable Outer Diameter: 15.8 mm
Spiral inner cable Diameter : 8 mm

 

More choice for cable length:

 

Single Turbine Rotating Gear Series

10FT

12FT

14FT

15FT

17FT

19FT

21FT

29FT

 

Planetary Gear Series

10FT

12FT

14FT

15FT

19FT

 

The Kit Includes:

· Steering Cable 

· Steering Helm -  Planetary gear, 3/4"" tapered shaft

· Bezel Kit

· Steering Wheel

· 90 degree bearing

 

1. Designed and developed especially for marine use.

2. Mainly applied in mechanical/manual steering for yachts, fishing boats and other waterborne vehicles.

3. Made in zinc alloy, corrosion resistant, ergonomically designed, easy to install, compact for mounting.

4. Combined with steering cable, 316 stainless steel end fittings, can be any length within 30 Feet.

 

STEERING HELM :

The Steering Helm is a gearbox arrangement mounted on the dashboard of the boat.On the shaft of the helm is mounted the Steering Wheel.

Applications:

Suit for max. 30 Feet(9 meters) out board boat(up to 200hp)

Max load 300 pounds at tiller.

Planetary Gear design:3 turns lock to lock

Max steering wheel dia 406mm (16")

Minimal feedback

Shaft Length: 125mm

Material:Chromed plated Zinc Alloy

 

BEZEL KITS

Bezel kit is a plastic part along with related hardware which is mounted between the steering wheel and dash board to cover the helm hardware.

 

Features:

Bezel made from Engineering Plastic

Black color available as standard options

90 degree tilt

Contains mounting hardware

 

STEERING CABLE

The Steering Cable is a push pull mechanical cable which convents the rotary motion of the helm to linear motion at the engine/rudder.One end of the cable is connected to the helm & the end to the rudder.The latest construction technology, the internal control line used elastic material.Output used 304 stainless steel seamless pipe and corrosion-resistant materials, control lines has longer life.

5-30 feet length control line can be used, and to increase per 1-foot increments.

 

Features:

Output ends made of 316 Stainless Steel

Maximum Trave:9inch(225mm)

Minimum bend radius:8 inch (200mm)

Maximum working load at Tiller end:5000N

Cable Outer Diameter:16.5mm

Spiral inner cable Diameter:8mm



When replacing your existing cable, you can usually find a part number and/or length stamped on the outer jacket.
If it is not legible, it will be necessary to make careful examination of your system to determine what type of cable you need and then to
actually measure the length required for proper cable replacement of selection and installation.
Follow the above quick method for measuring all steering cables to determine the correct length you will need.
Simply measure the lenath of the "B" requirement as indicated below. Then add 30 inches. Divided the total by 12.
Your answer will probably be xx.x. Whatever the number before the decimal is the whole foot conversion.
Take the number and round up to the next whole foot measurement. This work for either rack (shown above) or rotary steering cable.

For more information, please feel free to contact us!